Product ID:KG3X HONING OIL
MSDS Date:08/15/1987
FSC:9160
NIIN:00D001532
MSDS Number: BBFHR

Emergency Phone: (314)781-2105

Preparer: TERRY HELLER,MGR MTLS R&D

Cage: 58436

Telephone: 314-781-2100

Cage: 58436

NON-PETROLEUM FATTY OIL

ACGIH TLV: 5MG/CUM (OIL MIST)

PRESERVATIVE

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:ACUTE:EYE:VAPORS ARE IRRITATING,CAUSE
REDNESS,BURNS;SKIN:IRRITATION,OIL
ACNE,FOLLICULITIS,COMEDONES;INHALATION:COUGHING,SORE
THROAT,HEADACHE,CHEST PAIN,DIFFICULT BREATHING;INGESTION:LOOSE
BOWELS. CHRO NIC: SKIN:IRRITATION,SENSITIZATION,INFECTS OPEN
CUTS&SORES;OTHER:MATERIAL WILL SUPPORT GROWTH OF
BACTERIA,MOLD,FUNGUS.
Effects of Overexposure:SEE HEALTH HAZARDS
Medical Cond Aggravated by Exposure:PREDISPOSITION FACTORS:INDIVIDUALS
WITH SENSITIVE SKIN OR LARGE AMOUNTS OF BODY HAIR. INDIVIDUALS WITH
PRE-EXISTING RESPIRATOY IMPAIRMENTS CAN DISPLAY INCREASED
SENSITIVITYY TO OIL MIST OR VAPORS.

First Aid:EYES:FLUSH WITH WATER FOR 15 MINUTES.SEEK MEDICAL
ATTENTION;SKIN:WASH WITH SOAP & WATER;INHALATION:REMOVE TO FRESH
AIR,GIVE CPR/O*2 IF NEEDED.SEEK MEDICAL ATTENTION
IMMEDIATELY;INGESTION:DO NOT INDUCE VOMIT,SEEK MEDICAL ATTENTION.

Flash Point Method:COC
Flash Point:370F,188C
Extinguishing Media:FOAM,CO*2,DRY CHEMICAL
Fire Fighting Procedures:TREAT AS AN OIL FIRE. DO NOT USE WATER,AS
MATERIAL WILL FLOAT AND SPREAD ON WATER.WEAR SCBA
Unusual Fire/Explosion Hazard:SEALED CONTAINERS MAY LEAK,BURST OR
EXPLODE,RELEASING CONTENTS AND SPREADING FIRE. MATERIAL WILL BURN
IF IGNITED.

Spill Release Procedures:CONTAIN & ABSORB IN INERT MATERIAL. PLACED IN
SUITABLE DISPOSAL CONTAINER. WARNING:MATERIAL IS GREASY & SLIPPERY.

Handling and Storage Precautions:STORE AWAY FROM HEAT OR FLAMES. IF
STORED OUTDOORS,STORE SO AS TO SHED WATER TO PREVENT RUSTING OF
DRUMS & SPILLING CONTENTS.
Other Precautions:MATERIAL SHOULD BE HEATED TO 100F & MIXED PRIOR TO
TRANSFER OF CONTENTS IF PRODUCT SEPARATES DUE TO COLD STORAGE
(<50F). VENT CONTAINERS IF HEATING. EMPTY CONTAINERS RETAIN
MATERIAL RESIDUE,FOLLOW LAB EL WARNINGS.

Respiratory Protection:NIOSH APPROVED RESPIRATOR FOR OIL MIST IF TLV OF
5MG/CUM IS EXCEEDED.
Ventilation:LOCAL EXHAUST IF TLV IS EXCEEDED.
Protective Gloves:OIL RESISTANT GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:APRON
Work Hygienic Practices:DO NOT WEAR OIL-SOAKED CLOTHING
Supplemental Safety and Health
CLEAN MATERIAL FROM PARTS USING ALKALINE CLEANER. POLLUTION BY ANY
AMOUNT OF WATER OR ALKALINE MATERIAL WILL LEAD TO THE FORMATION OF
SOAPS THAT CLOG THE HONING MACHINE OIL FILTER.

HCC:N1
Boiling Pt:B.P. Text:>460F,>238C
Melt/Freeze Pt:M.P/F.P Text:35F/CONGEAL
Vapor Pres:<1
Vapor Density:>20(EST)
Spec Gravity:0.905
Evaporation Rate & Reference:NOT VOLATILE
Solubility in Water:<1%
Appearance and Odor:AMBER COLOR LIQUID WITH FATTY ODOR
Corrosion Rate:SLOW

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS. MATERIAL WILL SLOWLY CORRODE AND STAIN METALS.
Stability Condition to Avoid:HEAT SPARKS,OPEN FLAMES
Hazardous Decomposition Products:OXIDES OF CARBON. COMPOUNDS CONTAINING
CARBONYL,HYDROXYL,CARBOXYL
GROUP,OXIRANE,GLYCEROL,HYDROPEROXIDES,ALDEHYDES,KETONE

Waste Disposal Methods:DISPOSE OF IAW FEDERAL,STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.